UPRIGHT BROOM.
3-20.
a. General.
Broom is mounted on the rear wall in back of the left
side workbench.
b. Removal.
Refer to figure 15 and unfasten two straps and
remove broom.
Install broom in reverse order of removal, b.
c. Installation.
above.
BOLT CUTTER.
a. General. The bolt cutter is mounted on the rear wall in back
of the left side workbench.
b. Removal. Unfasten straps (9 & 10) and lift bolt cutter from
its mounting bracket (fig. 15).
c. Installation.
Install bolt cutter in reverse order of removal,
b. above.
