TM 9494054714&P
Operator/Crew Preventive Maintenance Checks and Services (Cont)
Table
2-1.
LOCATION
NOT FULLY MISSION
ITEM TO
ITEM
CAPABLE IF:
PROCEDURE
INTERVAL
CHECK/SERVICE
NO.
Small parts cabi-
Check that small parts
Small Parts
15
Quarterly
net is loose or
Cabinet (p. 3-3) and
Cabinet and
if drawers do not
tool box (p. 3-33) are
Tool Box
securely mounted and
open and close
that small parts cabinet
freely.
drawers operate freely.
tighten any loose hard-
ware. Notify organiza-
tional maintenance to
replace any missing
mounting hardware. Lu-
bricate drawer sliding
surfaces with grease as
needed.
Workbench is not
Check that front work-
Front Work
Quarterly
16
securely mounted;
bench (p. 35) is se
bench
if drawers are
cure, that drawers oper-
ate freely, and that
stuck, binding,
drawer stops function
or have broken
properly. Tighten any
stops; or if
Loose hardware, and
hardware is loose
notify organizational
or missing.
maintenance to replace
any missing hardware.
Lubricate drawer slides
with grease as needed.
Machinist vise is
machinist
that
Check
Machinist
17
Quarterly
loose or does not
vise (P. 37) is secure-
Vise
ly mounted to workbench
operate freely.
freely.
operates
and
tighten mounting hard-
ware as needed. Notify
organizational m a i n t e -
missing
any
nance of
hardware. Clean machin-
ist vise with a solvent-
dampened cloth as need-
L u b r i c a t e drive
ed.
screw and sliding s u r -
vise w i t h
Faces of
grease as needed.
NOTE
It is convenient to
perform PMCS items
18 and 19 concur-
rently.
2-7
Change 1
