TM 9-4940-547-14&P
3-6.
Stools .
a. General.
Two stools are located under the front workbench and
two stools are located on top of the front workbench.
b.
Removal (fig 3).
Unfasten four straps (16) and remove stools.
c.
Installation.
Install in reverse order of removal, b above.
3-7.
Clock.
a. General.
The clock is located on the front wall above the
front workbench.
b. Removal (fig 3). Remove clock from mounting bracket.
Remove
two screws (15) and the bracket (17).
c.
Installation.
Install in reverse order of removal, b above.
3-8.
Small Parts Cabinet.
a. General.
The small parts cabinet is located under the front
workbench in back of the stools.
b.
Removal (fig 3).
(1) Remove two stools under the front workbench (para 3-6).
(2) Remove the ten (10) rubber electrical insulation mats.
(3) Remove strap (13), two each screws (10), washers (11), and
nuts (12).
(4) Remove four screws (15) and two loops (14).
(5) Remove the cabinet.
Install the small parts cabinet in reverse order
c.
Installation.
of removal, b above.
3-9.
Tool Box Appendix A.
a. General.
Tool box A is located on the roadside of the front
workbench.
b.
Removal (fig 3).
(1) Remove tool box A by loosening strap (13).
(2) Remove strap (16), four screws (15), and two loops (14).
c.
Installation.
Install in reverse order of removal, b above.
3-3
