TM 9-4940-549-14&P
CONVENIENCE RECEPTACLES, LAMP BASES, AND TOGGLE SWITCHES.
Removal.
a.
Switch all circuit breakers on the control panel to OFF and
(1).
disconnect electrical power source.
(2).
Remove convenience receptacles, lamp bases, and toggle switch-
es, as illustrated in figure 6-4.
b.
Cleaning and Inspection.
Clean all metal parts with cleaning solvent and dry thoroughly.
(1).
(2).
Inspect all parts for cracks , dents, or other damage. Replace
defective parts.
Inspect for defective hardware and loose connections. Replace
(3).
defective hardware and be sure all electrical connections are
clean and secure.
(4).
Inspect the wiring for breaks or damaged insulation.
Repair
or replace damaged wiring.
Installation. Install the convenience receptacle, lamp bases, and tog-
c.
gle switches, as illustrated in figure 6-4.
FLOODLIGHTS.
Removal.
Remove the floodlight as illustrated in figure 6-5.
a.
b.
Cleaning and Inspection.
(1) Clean all parts with a cloth dampened in cleaning solvent and
dry thoroughly.
(2) Inspect all parts for cracks, corrosion, and other defects.
Replace a defective floodlight.
Installation.
Install the floodlights as illustrated in figure 6-5.
c.
