TM 9-4940-549-14&P
Floodlights, Removal and Installation.
a.
Incandescent Lamp Replacement (Refer to figure 6-6).
(1) Remove the eight screws (1) and separate the assembled door
(2) from the body.
(2) Remove the lamp from the lampholder by pressing in and rotat-
ing one-quarter turn.
(3) Install new lamp, position assembled door on the body and se-
cure with the eight screws.
b.
Removal (Refer to fig ure 6-7).
(1) Disconnect electrical lead.
(2) Remove four screws and remove the light assembly.
c.
Installation (Refer to figure 6-7).
(1) Position the light assembly against the panel and secure with
four screws.
(2) Connect electrical lead.
