TM 9-4940-549-14&P
b.
Cleaning and Inspection.
(1) Clean- circuit breakers with a clean, lint-free cloth.
(2) Inspect circuit breakers for cracks, loose terminals, and test
for continuity across the terminals. Continuity should be in-
dicated with the breaker ON, and not indicated with the break-
er OFF.
c.
Installation.
Removal. Remove the 120 and 240-volt receptacles as illustrated in
a.
Cleaning and Inspection.
b.
(1) Clean the receptacles with a clean, lint-free cloth.
(2) Inspect for loose terminals and damage and replace a defective
receptacle.
Installation.
c.
a. Removal.
b.
Cleaning and Inspection.
(1) Clean voltmeter with a clean, lint-free cloth.
(2) Inspect voltmeter for damage and loose terminals and replace a
defective voltmeter.
Installation.
c.
Remove the running time meter as illustrated in figure
a.
Removal.
18-6.
b.
Cleaning and Inspection.
(1) Clean the running time meter with a clean, lint-free cloth.
(2) Inspect for damage and loose terminals, and replace a defective
running time meter.
Installation.
Install the running time meter as illustrated in figure
c.
18-6.