25. Set and secure exterior guy ropes and stakes.
26. Install four tensioning straps on the open ends of the FPU-12 and FPU-8 as follows:
a. Attach the single strap end of the harness to the bottom corner block on one side of the container.
b. Attach the four straps of the harness to the clips on the straps affixed to the EPC cover located on
the opposite side of the container.
c. Tighten all straps as necessary.
d. Install remaining stakes.
Do not attempt to fold the EPC while on the roof of the container. This should be
performed on clean level ground.
Storage of the EPC
1. Remove all stakes, straps, guy ropes and hardware and return them to the storage bag.
2. Remove the EPC cover from the top of the container and place it on the ground in a clear area that is
large enough to lay the cover flat.