and
lights, removal
installation.
4 - 1 3 . Convenience Receptacles, Lamp Bases,
and Toggle Switches
Figure 1-2. Convenience reptacles. lamp bases. and toggle
a. Removal.
switches.
(1) Switch all circuit breakers on the control
power source.
a. Removal. Remove the floodlight as illustrated
b. Cleaning and Inspection.
2.
(1) Clean all parts with a cloth dampened in
b. Cleaning and Inspection.
cleaning solvent and dry thoroughly.
(1) Clean all metal parts with cleaning solvent
(2) Inspect all parts for cracks, corrosion, and
and dry thoroughly.
other defects and replace a defective floodlight.
(2) Inspect all parts for cracks, dents, or other
c. Installation. Install t h e f l o o d l i g h t s a s
dam age. Replace defective parts.
(3) Inspect for defective hardware and loose
connections. Replace defective hardware and be
sure all electrical connections are clean and secure.
(4) Inspect the wiring for breaks or damaged
insulation. Repair or replace damaged wiring.
c. Installation. Install the convenience recep-
tacle, lamp bases, and toggle switches, as illustrated