TM 10-5411-236-13&P
OPERATOR AND UNIT MAINTENANCE
AUTHORIZED STOCKAGE LIST MOBILITY SYSTEM (ASLMS)
MODEL NUMBER FPU-8/12 PARTS (OD) P/N 15005002-001
MODEL NUMBER FPU-8/12 PARTS (DS) P/N 15005002-002
MODEL NUMBER FPU-8/12 BULK (OD) P/N 15005001-001
MODEL NUMBER FPU-8/12 BULK (DS) P/N 15005001-002
TROUBLESHOOTING PROCEDURES
INITIAL SETUP:
Material/Parts
References
None
None
Personnel Required
Equipment Condition
One
FPU set up.
Tools
General Mechanic's Tool Kit (Item 4, WP 0105 00)
NOTE
If malfunction corrective action does not correct the malfunction, notify unit maintenance.
Table 1. Operator Troubleshooting
Malfunction
Test or inspection
Corrective action required
Ensure jaws on corner
Using appropriate BII tools, fully retract
1. Unable to Insert Horizontal
horizontal interconnectors are
horizontal interconnector bolts. Clean
Interconnectors into ISO Corner
fully open. Inspect for debris
Blocks Of FPU-12.
in ISO corner blocks.
0037 00.)
Inspect open end of loading
00) the loading rail connectors and
2. Unable to Insert Loading Rail
rails on the FPU-12 for
Connectors Into FPU-12 Loading
open ends of loading rails as
debris. Inspect for proper
Rails.
necessary. (Refer to WP 0005 00, 0037
lubrication.
00.)
3. Unable to Install Transversal
Clean as required. (Refer to WP 0037
Stabilizer Cross Bar on to the
Inspect for Debris.
00.)
Loading Rail Connectors.
4. Unable to Retract Expandable
Inspect for Debris. Inspect
00) the tensioning block, tensioning bolt
End Tensioning Blocks.
for proper lubrication.
and jam nut as necessary.
Inspect open end of loading
00) the loading rail connectors and
rails on the FPU-12 for
5. Unable to Join FPU-8 to FPU-12.
open ends of loading rails as
debris. Inspect for proper
necessary. (Refer to WP 0005 00, 0037
lubrication.
00.)
0013 00-1