TB 9-4910-746-30
4.
Installation--Continued
rivet nuts (MS27130-A20). Secure six
strap loops (MS51939-3) to storage
(2) Position a storage cabinet
cabinet using twelve #10 x 1-in. counter-
(7125-0-330-O130) in truck in accord-
sunk head machine screws (MS35190-275).
ance with figures 9 and 10. Mark and
(7) Position 4-in. machinist's
drill four O.44-in. diameter holes in
bottm plate of storage cabinet.
vise (5120-00-293-1439) on work table
right side in truck as shown in figures
Locate at four corners, allowing for
9 and 10. Using the base of the mach-
minimum required clearance for 3/8- x
1-1/8-in. hex head capscrews. Using
inist's vise as a template, mark and
drill four O.56-in. diameter holes
storage cabinet as a template, mark and
through tabletop. Secure machinist's
drill four O.39-in. diameter holes
vise to work table with four 1/2- x 2-
through truck floor in accordance with
in. hex head capscrews (MS90725-115),
four 1/2-in. flat washers (MS27183-17),
four 3/8- x 1-1/8-in. hex head capscrews
four 1/2-in. lockwashers (MS35338-48),
(MS90725-61), four 3/8-in. flat washers
and four 1/2-in. hex nuts (MS51967-14).
(MS27183-13), four 3/8-in. lockwashers
(MS35338-46), and four 3/8-in. hex nuts
(8) Position 1-qt liquid measure
( MS51967-8).
(7240-00-233-6013), 2-qt liquid measure
CAUTION
(7240-00-255-8113), and 12-ton hydraulic
jack (5120-00-224-7330) in accordance
Be sure storage cabinet
with figure 10. Secure liquid measures
drawers adjacent to hole
locations are removed before
and hydraulic jack to storage cabinet
using three 48.00-in. retaining straps
(7550588-3).
(3) Mark and drill three 0.44-in.
(9) Position five wash pans
diameter holes in left side of storage
(4940-00-795-3595) and secure to work
cabinet in accordance with figure 13.
Install three 3/8- x 8-in. squareneck
table cross braces using one 66.00-in.
retaining strap (7550588-9) in accord-
bolts (MS35751-89), six 3/8-in. flat
ance with figure 11.
washers (MS27183-13), three 3/8-in.
lockwashers (MS35338-46), and six 3/8-
in. hex nuts (MS51967-8).
(10) Position four drain pans
(4910-00-387-9592) and secure to work
table cross braces using two 92.00-in.
(4) Install padlock (5340-00-682-
1508) on storage cabinet in accordance
retaining straps (7550588-7) in ac-
with figure 9.
cordance with figure 11.
(11) Locate portable tool box
(5) Position three electrical
(5140-00-315-2758) in accordance with
power cable assemblies (6150-00-682-
3460) on squareneck bolts in accordance
60.00-in. retaining straps (7550588-2).
with figures 9 and 10.
(12) Mark and drill four 0.38-in.
CAUTION
diameter holes in truck slat in accord-
Be sure storage cabinet
ance with figure 11. Install four 3/8-
drawers adjacent to hole
x 9-in. squareneck bolts (MS35751-91)
locations are removed before
to truck slats using eight 3/8-in. flat
washers (MS27183-13), four 3/8-in.
lockwashers (MS35338-46), and eight
(6) Mark and drill twelve 0.25-
3/8-in. hex nuts (MS51967-8).
in. dimeter holes in left side of
storage cabinet in accordance with
11
