TB 9-4910-746-30
4.
Installation--Continued
(2) Secure two hydraulic dolly
type jacks (4910-00-289-7233) using two
92.00-in. retaining straps (7550588-7)
(13) Locate disk sander (5130-00-
in accordance with figure 15.
560-9728) on work table and secure to
truck slat with a 24.00-in. retaining
(3) Position crowbar (5120-00-
strap (7550588-5) in accordance with
224-1390) by securing to trailer slat
using two 24.00-in. retaining straps
(7550588-5) in accordance with figure
(14) Locate automotive maintenance
15.
hoisting unit (4910-00-448-0254) and
secure to table cross brace with two
(4) Secure 20-ton hydraulic jack
24.00-in. retaining straps (7550588-5)
kit (5120-00-595-8387) to trailer floor
in accordance with figure 9.
using a 110.00-in. retaining strap
(7550588-10) in accordance with figure
(15) Locate transmission and
15.
differential lift (4910-00-585-3622) in
truck and secure to table cross braces
f. Follow steps (1) thru (4) below
with two 48.00-in. retaining straps
for equipment installation in unit 4,
(7550588-3) in accordance with figure
M105A2 cargo trailer.
9.
(1) Position 30-ton hydraulic
(16) Position two 115/250 v ac
jack (5120-00-188-1790) and two 8-ton
extension lights (6230-00-268-9436) and
hydraulic jacks (5120-00-595-8396) on
nine 25-ft extension lights (6230-00-
front wall in accordance with figure
729-9259) on squareneck bolts on left
18. Secure using a 60.00-in. retaining
wall in truck in accordance with figures
strap (7550588-2).
9 and 11.
(2) Position ten wash pans
(17) Locate two engine and trans-
(4940-00-795-3595) in accordance with
mission slings (4910-00-944-4915) in
truck and secure to truck slat with two
retaining strap (7550588-7).
24.00-in. retaining straps (7550588-5)
in accordance with figure 10.
(3) Position steam cleaner (4940-
00-186-0027) on floor of trailer in
(18) Ladder (2540-00-641-0187) is
accordance with figure 18. Using
stowed in frame of truck in accordance
tubular skid as a template, mark and
with figure 9.
drill eight 0.39-in. diameter holes
through floor in accordance with figure
e. Follow steps (1) thru (4) below
19. Secure steam cleaner using four U-
for equipment installation in unit 3,
bolts (NAS3105-24-2O), eight 5/16-in.
M105A2 cargo trailer.
lockwashers (MS35338-45), and eight
5/16-in. hex nuts (MS51968-5). (U-
(1) Locate diesel engine gener-
bolts and hex nuts have UNF threads.)
ator set (6115-00-465-1044) in trailer
in accodance with figure 15. Using
(4) Position and secure two
base of diesel engine generator set as
engine transport stands (4910-00-338-
a template, mark and drill four 0.56-
6673) in accordance with figure 18.
in. holes through trailer floor in
Secure using four 92.00-in. retaining
accodance with figure 16. Secure
straps (7550588-7).
using four 1/2- x 1-1/2-in. hex head
capscrews (MS90725-113), four 1/2-in.
lockwashers (MS35338-48), and four 1/2-
in. hex nuts (MS51967-14).
12
