TB 9-4940-316-30
4.
Installation--Continued
drill two 0.33-in. diameter holes through the bench top.
machine screws (MS35206-297), and two 5/16-in.
Secure bench top to rear brace angle, using two 5/16x 1-
lockwashers (MS35338-45). Secure shelf to bench
1/2-in. countersunk head machine screws (MS35190-
support and 10-drawer cabinet wall using two 5/16x 7/8-
308), two 5/16in. lockwashers (MS35338-45), and two
in. pan head machine screws (MS35206-297), two
5/16-in. hex nuts (MS51967-5)
5/16in. lockwashers (MS35338-45), and two 5/16-in. hex
nuts (MS51967-5).
(16)
Position vise (3460-00-2773504)
(13)
Fabricate a bench top in
base of vise as template, mark and drill three 0.39-in
accordance with figure 8. Position bench top on the top
diameter pilot holes through bench top. Secure vise to
of the installed cabinets and bench supports in
bench top, using three 1/2x 1-3/4-in. hex head lag bolts
accordance with figures 2, 4, and 5. Using the bench
(MS16992-580), three 1/2-in. flat washers (AN970-8),
supports as templates, mark and drill six 0.33-in.
and three 1/2-in. lockwashers (MS35338-48)
diameter holes through the bench top. Counterbore 90
by 0.33-in. deep on the top surface of the bench top.
(17)
Secure two 5/16x 2-31/32in.
Secure bench top to bench supports, using six 5/16x 1-
shoulder eyebolts (MS51937-2) and two 5/16-in. hex
1/2-in. countersunk head machine screws (MS35190-
nuts (MS51967-5) to existing blind rivet nuts in floor.
308), six 5/16-in. lockwashers (MS35338-45), and six
Position two stools (7110-00-634-8596) in accordance
5/16in. hex nuts (MS51967-5)
retaining strap (7550588-10)
(14)
Position front brace angle on top
of bench top and against the front right end wall in
(18)
Secure
basket
(7290-00-
accordance with figure 5 and over installed blind rivet
7540843) to shelf, using 72-in. retaining strap (7550588-
nuts in accordance with figure 4. Secure to wall using
1) in accordance with figure 4
two 5/16x 7/8in. pan head machine screws (MS35206-
297) and two 5/16-in. lockwashers (MS35338-45). Using
(19)
Secure wash pan (4940-00795-
the installed front brace angle as a template, mark and
3595) to shelf using 48-in. retaining strap (7550588-3) in
drill two 0.25-in. diameter pilot holes into the bench top.
accordance with figure 4
Secure bench top to front brace angle using two 5/16x 1-
in. hex head lag bolts (MS16992-520) and two 5/16-in.
(20)
Secure four 5/16x 2-31/32in.
lockwashers (MS35338-45)
shoulder eyebolts (MS51937-2) and four 5/16-in. hex
nuts (MS51967-5) to existing blind rivet nuts in rear of
(15)
Position rear brace angle on top
floor. Secure tool kit (5180-00-6995273) to floor, using
of bench top and against the rear right end wall in
60-in. retaining strap (7550588-2) and 92-in. retaining
accordance with figure 5 and over installed blind rivet
strap (7550588-7) in accordance with figure 2
nuts in accordance with figure 4. Secure to wall using
two 5/16x 7/8in. pan head machine screws (MS35206
(21)
Secure
padlock
(5340-00-
297) and two 5/16-in. lockwashers (MS35338-45). Using
6821508) to hasp on 20-drawer cabinet in accordance
the installed rear brace angle as a template, mark and
with figure 4.
10
