TB 9-4940-316-30
5.
Installation--Continued
under cabinet tops and bench top
(2)
Position
20-drawer
cabinet
against right side wall in accordance with figures 14 and
CAUTION
Make sure cabinet drawers adjacent
to hole locations are removed before
3/8-in lockwashers (MS35338-46), two 3/8x 7/8-in. hex
head capscrews (MS9072559), and two 3/8x 1-1/8-in.
hex head capscrews (MS90725-61).
(7)
Using shelf (11021210) as
template, position between cabinets in accordance with
(3)
Repeat step 1 for one-
compartment cabinet (7125-00-991-2857). Repeat step
cabinet walls. Secure shelf to cabinets using four 5/16x
2 using four 3/8-in. lockwashers (MS35338-46), two 3/8x
3/4-in. hex head capscrews (MS90725-32), four 5/16in.
7/8in. hex head capscrews (MS90725-59), and two 3/8x
lockwashers (MS35338-45), and four 5/16-in. hex nuts
1-1/8-in. hex head capscrews (MS90725-61).
(MS51967-5)
(4)
Position bench top (11021209)
(8)
Position
two
strap
loops
on top surface of the two cabinets in accordance with
(MS51939-3) over the predrilled 0.22 in. diameter holes
in bench top (11021209 (fig. 21). Secure to bench top
through bench top and tops of cabinets. Enlarge the
using four #10 x 1-1/4-in. countersunk head machine
holes in the cabinet tops to 0.25-in. diameter, two holes
screws (MS35190-276), four #10 flat washers (AN970-
per cabinet. Refer to figure 21. Reposition and secure
3), four #10 lockwashers (MS35338-43), and four #10
bench top to cabinets, using four #14 x 3/4-in round
hex nuts (MS35649-202). Position basket (7290-00-754-
head wood screws (MS35495-124) placed under the
0843) between the strap loops and on the bench top in
bench top and going through the 0.25-in. diameter holes
accordance with figure 14. Secure basket to bench top
in the cabinets
using 110-in. retaining strap (7550588-10)
(5)
Position two support angles
(9)
Position vise (3460-00-2773504)
(11021208) in location shown in figure 14, so that the two
on bench top in accordance with figure 14. Using the
0.34-in. diameter holes are on the bench top, and over
base as template, mark and drill three 0.56-in. diameter
installed blind rivet nuts in accordance with figure 17.
holes in bench top in accordance with figure 21. Secure
Secure, using six 3/8x 1-in. hex head capscrews
vise using three 1/2x 2-1/2-in. hex head capscrews
(MS90725-60) and six 3/8-in. lockwashers (MS35338-
(MS90725-117), three 1/2-in. flat washers (AN970-8),
46)
three 17/32-in. flat washers (MS27183-18), three 1/2-in
lockwashers (MS35338-48), and three 1/2-in. hex nuts
(6)
Using the two installed support
(MS51967-14)
angles as templates, mark and drill four 0.34-in. diameter
holes through bench top and cabinet tops. Secure
(10)
Position two stools (7110-00-
support angles to bench top and cabinets using four
634-8596) against front right side wall in accordance with
5/16x 1-3/4-in hex head capscrews (MS90725-39), four
5/16-in. lockwashers (MS35338-45), and four 5/16-in.
using 60-in. retaining strap (7550588-2)
hex nuts (MS51967-5). Place hex head of capscrew
12
