0040 00
TM 1-4920-433-13&P
INSPECTION OF INSTALLED ITEMS CONTINUED
CONTINUED
2.
Inspect hydraulic hose assembly tester hardware (Figure 1, Item 2, 3,4 and 6) for rust, cracks and rounded
heads. Replace as necessary.
REMOVAL
Remove four bolts (Figure 1, Item 6) four lock washers (Figure 1, Item 3), eight lat washers (Figure 1, Item 2)
and four nuts (Figure 1, Item 4).
INSTALLATION
Attach hydraulic hose assembly tester (Figure 1, Item 1) to cabinet (F) (Figure 1, Item 7) by aligning bolt holes
of hydraulic hose assembly tester (Figure 1, Item 1) with holes of work surface (Figure 1, Item 5) and install four
bolts (Figure 1, Item 6), eight lat washers (Figure 1, Item 2), four lock washers (Figure 1, Item 3) and four nuts
(Figure 1, Item 4).
END OF WORK PACKAGE
0040 00-2