0047 00
TM 1-4920-435-13&P
NOTE
During installation of components same hardware should be used so as to maintain original
integrity of shop set.
INSPECTION OF INSTALLED ITEMS
THROATLESS SHEARING MACHINE
Figure 1.
Throatless Shearing Machine and Hardware.
1.
Inspect throatless shearing machine (Figure 1) for damage. Replace as necessary.
2.
Inspect all throatless shearing machine hardware (Figure 1, Item 3 through 7) for rust, cracks and rounded
heads. Replace as necessary.
REMOVAL
THROATLESS SHEARING MACHINE
Remove four bolts (Figure 1, Item 7), four upper lat washers (Figure 1, Item 6), four lower lat washers (Figure
1, Item 5), four lock washers (Figure 1, Item 4), and four nuts (Figure 1, Item 3) from anvil/throatless shearing
machine stand (Figure 1, Item 2).
0047 00-2