0048 00
TM 1-4920-435-13&P
INSPECTION OF INSTALLED ITEMS CONTINUED
STAKEHOLDER BENCH PLATE CONTINUED
1.
Inspect bench plate (Figure 1) for damage. Replace as necessary.
2.
Inspect bench plate hardware (Figure 1, Item 3 through 6) for rust, cracks and rounded heads. Replace as
necessary.
REMOVAL
STAKEHOLDER BENCH PLATE
Remove four screws (Figure 1, Item 3), four lat washers (Figure 1, Item 4), four lock washers (Figure 1, Item 5)
and four nuts (Figure 1, Item 6).
REPAIR OR REPLACEMENT
STAKEHOLDER BENCH PLATE
1.
If bench plate (Figure 1, Item 2) can be repaired by welding, weld damaged area IAW TM 1-1500-204-23.
Repair must not interfere with form, it, or function of bench plate (Figure 1, Item 2).
2.
Paint repaired bench plate (Figure 1, Item 2) IAW WP 0068 00, Figure 1.
INSTALLATION
STAKEHOLDER BENCH PLATE
1.
Align bolt holes of bench plate (Figure 1, Item 2) with inserts on bench plate assembly (Figure 1, Item 1).
2.
Install four bolts (Figure 1, Item 3), four lat washers (Figure 1, Item 4), four lock washers (Figure 1, Item
5) and four nuts (Figure 1, Item 6) attaching bench plate (Figure 1, Item 2) to stake support table assembly
(Figure 1, Item 1).
0048 00-2