TM 1-4920-435-13&P
0048 00
INSPECTION OF INSTALLED ITEMS
STAKE SUPPORT TABLE ASSEMBLY AND HARDWARE
Figure 2.
Stake Support Table Assembly and Hardware.
1.
Inspect stake support table assembly (Figure 2, Item 1) for damage. Replace as necessary.
2.
Inspect stake support table assembly hardware (Figure 2, Item 2 through 4) for rust, cracks and rounded
heads. Replace as necessary.
REMOVAL
STAKE SUPPORT TABLE ASSEMBLY AND HARDWARE
1.
Remove stakeholder bench plate IAW Stakeholder Bench Plate, REMOVAL.
2.
Remove four bolts (Figure 2, Item 4), four lock washers (Figure 2, Item 3), and four lat washers (Figure 2,
Item 2).
REPAIR OR REPLACEMENT
STAKE SUPPORT TABLE ASSEMBLY AND HARDWARE
1.
If stake support table assembly (Figure 2, Item 1) can be repaired by welding, weld damaged area IAW TM
1-1500-204-23. Repair must not interfere with form, it, or function of stake support table assembly (Figure
2, Item 1).
2.
Paint repaired stake support table assembly (Figure 2, Item 1) IAW WP 0068 00, Figure 1.
INSTALLATION
STAKE SUPPORT TABLE ASSEMBLY AND HARDWARE
1.
If new stake support table assembly is installed, match drill mounting holes to accommodate Stakeholder
bench plate.
2.
Align mounting holes of stake support table assembly (Figure 2, Item 1) with loor inserts.
0048 00-3