TM 1-4920-436-13&P
OPERATOR INSTRUCTIONS
ENGINE SHOP
CONNECTING POWER TO THE SHELTER
INITIAL SETUP:
Tools and Special Tools
References
Electrical Repairers Tool Kit
(WP 0060 00, Table 2, Item 103 )
TM 9-6150-226-13
General Mechanics Tool Kit
TM 9-6150-226-23P
(WP 0060 00, Table 2, Item 104 )
Equipment Condition
Personnel Required
Functional
CMF 15 Series (2)
EXTERNAL GROUNDING OF SHELTER
NOTE
Shelter is grounded through an externally connected power supply. Consult a qualiied electri-
cian for proper grounding procedures required for surrounding soil conditions.
Figure 1.
External Grounding of Shelter.
1.
Remove ground rod assembly (Figure 1, Item 5 and 6) from shelter BII box .
2.
Remove slide hammer (WP 0065 00, Figure 2, Item 4) from Shelter BII box .
NOTE
Ground rod location should permit ground cable lug to reach ground stud on power entry panel.
3.
Drive ground rod (Figure 1, Item 6) into ground using slide hammer (WP 0065 00, Figure 2, Item 4).
0006 00-1