0039 00
TM 1-4920-436-13&P
INSPECTION OF INSTALLED ITEMS CONTINUED
CONTINUED
2.
Inspect upright drilling machine hardware (Figure 1, Item 2 through 6) for rust, cracks and rounded heads.
Replace as necessary.
REMOVAL
Remove two bolts (Figure 1, Item 2), two lock washers (Figure 1, Item 5), two upper lat washers (Figure 1, Item
3), two lower lat washers (Figure 1, Item 4) and two nuts (Figure 1, Item 6).
INSTALLATION
Replace upright drilling machine (Figure 1, Item 1) by installing two bolts (Figure 1, Item 2), two lock washers
(Figure 1, Item 5), two upper lat washers (Figure 1, Item 3), two lower lat washers (Figure 1, Item 4) and two
nuts (Figure 1, Item 6).
END OF WORK PACKAGE
0039 00-2