TM 1-4920-436-13&P
0038 00
REMOVAL CONTINUED
11), four lower lat washers (Figure 1, Item 7), four lock washers (Figure 1, Item 8), and four nuts (Figure 1,
Item 9).
INSTALLATION
1.
To install 10 ton press (Figure 1, Item 1), align bolt holes of 10 ton press (Figure 1, Item 1) with bolt holes in
work surface. Install four bolts (Figure 1, Item 2), four upper lat washers (Figure 1, Item 3), four lower lat
washers (Figure 1, Item 4), four lock washers (Figure 1, Item 5), and four nuts (Figure 1, Item 6).
2.
To install hand pump (Figure 1, Item 10), align bolt holes of hand pump (Figure 1, Item 10) with bolt holes in
work surface. Install two bolts (Figure 1, Item 13) into the front side of the pump, two bolts (Figure 1, Item 12)
into the back side of the pump, four upper lat washers (Figure 1, Item 11), four lower lat washers (Figure 1,
Item 7), four lock washers (Figure 1, Item 8), and four nuts (Figure 1, Item 9).
END OF WORK PACKAGE
0038 00-3/4 blank