TM 1-4920-436-13&P
0050 00
INSTALLATION CONTINUED
WATER FEED-THRU CONNECTOR ASSEMBLY CONTINUED
5.
Have assistant install lat washer (Figure 6, Item 3), lock washer (Figure 6, Item 4), second lanyard (Figure 6,
Item 6), and nut (Figure 6, Item 5) on inside of shelter.
6.
Tighten screws (Figure 6, Item 2).
INSPECTION OF INSTALLED ITEMS
AIR FEED-THRU CONNECTOR ASSEMBLY
Figure 7.
Inspect Air Feed-thru Connector Assembly.
1.
Inspect condition of threads on both ends of air feed-thru connector assembly (Figure 7, Item 1).
2.
Replace if damage is detected.
3.
Ensure that protective dust caps (Figure 7, Item 2) are attached.
4.
Ensure weld on connector is not cracked or broken. If defective, replace.
0050 00-5