TM 1-4920-436-13&P
FIELD MAINTENANCE
ENGINE SHOP
MAINTENANCE INSTRUCTIONS FOR FIRE EXTINGUISHER BRACKETS AND HARDWARE
INITIAL SETUP:
Tools and Special Tools
Personnel Required
General Mechanics Tool Kit
CMF 15 Series (1)
(WP 0060 00, Table 2, Item 104 )
Equipment Condition
Torque Wrench, 0-600 in. lbs
Fire Extinguisher Removed
(WP 0060 00, Table 2, Item 109 )
INSPECTION OF INSTALLED ITEMS
NOTE
During installation of components same hardware should be used so as to maintain original
integrity of shop set.
Figure 1.
Inspect Fire Extinguisher Bracket.
1.
Inspect ire extinguisher bracket (Figure 1, Item 1) for damage. Replace as necessary.
2.
Inspect ire extinguisher bracket hardware (Figure 1, Item 2 through 4) for rust, cracks, and rounded heads.
Replace as necessary.
REMOVAL
Remove two bolts (Figure 1, Item 4), two lock washers (Figure 1, Item 3), and two lat washers (Figure 1, Item
2).
INSTALLATION
1.
Position ire extinguisher bracket (Figure 1, Item 1) by aligning bolt holes with wall inserts.
2.
Install two bolts (Figure 1, Item 4), two lock washers (Figure 1, Item 3), and two lat washers (Figure 1, Item
2).
0051 00-1
