TM 1-4920-438-13&P
0057 00
INSPECTION OF INSTALLED ITEMS
AIR FEED-THRU CONNECTOR ASSEMBLY
Figure 7.
Inspect Air Feed-thru Connector Assembly.
1.
Inspect condition of threads on both ends of air feed-thru connector assembly (Figure 7, Item 1).
2.
Replace if damage is detected.
3.
Ensure that protective dust caps (Figure 7, Item 2) are attached.
4.
Ensure weld on connector is not cracked or broken. If defective, replace.
REMOVAL
AIR FEED-THRU CONNECTOR ASSEMBLY
Figure 8.
Disassembly of Air Feed-thru Connector Assembly.
1.
Have assistant hold nut (Figure 8, Item 4) and washer (Figure 8, Item 2) inside shelter.
2.
Remove nuts (Figure 8, Item 4), lat washers (Figure 8, Item 2), lock washers (Figure 8, Item 3), and screws
(Figure 8, Item 1), releasing air feed-thru connector assembly (Figure 8, Item 5).
0057 00-5