TM 1-4920-438-13&P
0059 00
INSPECTION OF INSTALLED ITEMS CONTINUED
OIL AND WATER SEPARATOR CONTINUED
2.
Replace oil/water separator hardware (Figure 7, Item 2 through Figure 7, Item 4) as necessary.
If necessary, torque bolts (Figure 7, Item 4) 100-140 in. lbs.
3.
4.
Inspect oil/water separator (Figure 7, Item 1) for damage that would deem oil/water separator (Figure 7, Item
1) non-operational.
5.
Replace oil/water separator (Figure 7, Item 1) if deemed non-operational.
REMOVAL
OIL AND WATER SEPARATOR
1.
Remove non-metallic hose Non-Metallic Hose and Fittings Remove .
2.
Remove two bolts (Figure 7, Item 4), two lock washers (Figure 7, Item 3), two lat washers (Figure 7, Item 2),
and oil/water separator (Figure 7, Item 1).
0059 00-5