TM 1-4920-440-13&P
0040 00
REMOVAL CONTINUED
TYPIST DESK CONTINUED
3.
Remove four bolts (Figure 2, Item 10), four lock washers (Figure 2, Item 7), eight lat washers (Figure 2, Item
8) and four nuts (Figure 2, Item 6), detaching right rear and left front leg brackets (Figure 2, Item 9).
REPAIR OR REPLACEMENT
TYPIST DESK
1.
If right rear and left front leg brackets (Figure 2, Item 5) can be repaired by welding, weld damaged area IAW
TM 1-1500-204-23. Repair must not interfere with form, it, or function of right rear and left front leg brackets
(Figure 2, Item 5).
2.
Paint repaired right rear and left front leg brackets (Figure 2, Item 5) IAW WP 0059 00, 7.
3.
If right front and left rear leg brackets (Figure 2, Item 9) can be repaired by welding, weld damaged area IAW
TM 1-1500-204-23. Repair must not interfere with form, it, or function of right front and left rear leg brackets
(Figure 2, Item 9).
4.
Paint repaired right rear and left front leg brackets (Figure 2, Item 9) IAW WP 0059 00, 8.
INSTALLATION
TYPIST DESK
1.
Install four bolts (Figure 2, Item 10), four lock washers (Figure 2, Item 7), eight lat washers (Figure 2, Item 8)
and four nuts (Figure 2, Item 6), attaching right rear and left front leg brackets (Figure 2, Item 5).
2.
Install four bolts (Figure 2, Item 10), four lock washers (Figure 2, Item 7), eight lat washers (Figure 2, Item 8)
and four nuts (Figure 2, Item 6), attaching right front and left rear leg brackets (Figure 2, Item 9).
3.
Attach typist desk (Figure 2, Item 1) to shelter loor by installing four bolts (Figure 2, Item 2), four lock washers
(Figure 2, Item 3), and four lat washers (Figure 2, Item 4) to right rear and left front leg brackets (Figure 2,
Item 5) and right front and left rear leg brackets (Figure 2, Item 9).
Torque bolts (Figure 2, Item 2) installed to shelter loor, 160-190 in. lbs.
4.
END OF WORK PACKAGE
0040 00-5/6 blank
