0048 00
TM 1-4920-440-13&P
REMOVAL CONTINUED
4.
Remove damaged BNC connector (Figure 2, Item 2) attached to power entry panel by twisting BNC cable
connector (Figure 2, Item 4) counterclockwise.
5.
Remove damaged BNC connector (Figure 2, Item 2) attached to power entry panel cover (Figure 2, Item 1)
by twisting BNC cable connector (Figure 2, Item 4) counterclockwise.
6.
Remove damaged cable (Figure 2, Item 2).
INSTALLATION
1.
Install new BNC connector (Figure 2, Item 2) on power entry panel cover (Figure 2, Item 1) by twisting BNC
cable connector (Figure 2, Item 4) clockwise.
2.
Install new BNC connector (Figure 2, Item 2) into power entry panel by twisting BNC cable connector (Figure
2, Item 4) clockwise.
3.
Install power entry panel cover (Figure 2, Item 1) using four screws (Figure 2, Item 3).
4.
Move main circuit breaker to ON position.
END OF WORK PACKAGE
0048 00-4
