TM 1-4920-500-13&P
0007 00
ARMAMENT AND ELECTRICAL SHOP
OPERATION UNDER USUAL CONDITIONS
NOTES
Skip this Work Package if ECUs are not going to be installed.
ECUs are supplied by unit.
CABLE GUIDE BLOCK REMOVAL
WARNINGS
DO NOT attempt to remove cables if support cables are not secured.
Removing cables while under tension could cause SERIOUS INJURY or
DEATH to personnel.
Before installing ECUs, shelter expansion must be complete (see WP 0005
00), SUPPORT CABLES MUST BE SECURED (see WP 0005 00), and
electrical power supplied to shop (see WP 0006 00).
2
4
1
3
SSAE031
1. Remove three screws (1) from cable guide block (2) located at corner of fold-out floor (3).
2. Support cable (4) shall hang freely next to shelter.