TM 1-4920-500-13&P
ARMAMENT AND ELECTRICAL SHOP
MAINTENANCE INSTRUCTIONS FOR FIRST AID BRACKET ASSEMBLY
INITIAL SETUP
Tools And Special Tools:
References:
Torque Wrench 0-600 in. lbs.
(WP 0042 00, Table 2, Item 102)
Paint Brush
TM 1-1500-204-23-8
(WP 0042 00, Table 2, Item 107)
Equipment Conditions:
Functional
Materials/Parts:
First Aid Bracket
(WP 0044 00, Figure 14, Item 1)
Flat Washer (WP 0044 00, Figure 14, Item 2)
Lock Washer (WP 0044 00, Figure 14, Item 3)
Hex Head Bolt (WP 0044 00, Figure 14, Item 4)
Paint (WP 0048 00, Table 1, Item 3)
Primer (WP 0048 00, Table 1, Item 4)
Personnel Required: (1)
CMF 44B Welder
CMF 15 Series
NOTE
During installation of components same hardware should be used so as to
maintain original integrity of shop set.
2
1
SSAE136
INSPECT
1. Inspect first aid bracket (1) for loose bolts (2).
2. If necessary, torque bolts (2) 160-190 in. lbs.
3. If bolts (2) will not tighten to specified torque follow procedures in WP 0038 00.
4. Inspect first aid bracket (1) for damage.
5. Repair or replace first aid bracket (1) if damage is detected.
