TM 1-4920-500-13&P
0033 00
1
4
2
3
SSAE155
INSPECT
1. Move main circuit breaker to OFF position.
2. Remove four screws (3) attaching power entry panel cover (1) which is located below circuit breaker panel.
3. Remove power entry panel cover (1) from power entry panel.
4. Visually inspect BNC connectors (4) and cable (2) for damage.
5. Move main circuit breaker to ON position.
TEST
1. Move main circuit breaker to OFF position.
2. Remove four screws (3) attaching power entry panel cover (1) which is located below circuit breaker panel.
3. Remove power entry panel cover (1) from power entry panel.
4. Test BNC cable (2) for continuity.
5. Replace BNC cable (2) if breakage is detected.
6. Move main circuit breaker to ON position.