TM 1-4920-500-13&P
0033 00
REPLACE
WARNING
HIGH VOLTAGE exists in electrical system of shop. All electrical inspections,
repairs, or replacements will be performed with power OFF and only by a
qualified electrician. Serious shock hazards exist which could result in INJURY
OR EVEN DEATH to personnel.
1
2
3
3
3
3
4
SSAE0156
1. Move main circuit breaker to OFF position.
2. Remove four screws (3) attaching power entry panel cover (1) to power entry panel which is located below
circuit breaker panel.
3. Remove power entry panel cover (1) from power entry panel.
4. Remove damaged BNC cable (2) attached to power entry panel by twisting BNC cable connector (4) counter
clock wise.
5. Remove damaged BNC cable (2) attached to power entry panel cover (1) by twisting BNC cable connector (4)
counter clock wise.
6. Remove damaged cable (2).
7. Install new BNC cable (2) on power entry panel cover (1) by twisting BNC cable connector (4) clockwise.
8. Install new BNC cable (2) into power entry panel by twisting BNC cable connector (4) clockwise.
9. Install power entry panel cover (1) using four screws (3).
10. Move main circuit breaker to ON position.
End of Work Package
0033 00-3/(0033 00-4 blank)