0005
TM 1-4920-924-13&P
AVIATION SHOP EQUIPMENT CONTACT MAINTENANCE (AV SECM) SYSTEM OPERATION UNDER USUAL
CONDITIONS - (CONTINUED)
Closing
NOTE
Closing operating procedures are alike for all sliding shelves installed on the SECM roadside
assembly.
1.
On SECM roadside assembly (Figure 1, Item 1) press down on yellow lever (Figure 1, Item 2) installed on
right side of the shelf assembly (Figure 1, Item 3).
2.
While holding yellow lever (Figure 1, Item 2) down, push in on shelf assembly (Figure 1, Item 3).
3.
When shelf assembly (Figure 1, Item 3) is pushed in completely, shelf assembly (Figure 1, Item 3) will
lock into closed position.
Power Inverter
1. When using power provided from the power inverter of the AV SECM assembly, ensure power is distributed
equally as possible between circuit breakers of the M1079A1 series van.
2. Operate power inverter IAW Airpax Dimensions, Inc. DC to AC power Inverters Owners Manual for Models:
MIL-24/6000H-3PHQ.
Air Compressor
1. Ensure air compressor has quick disconnect ittings installed that are compatible with the ittings installed in
equipment that will be used with the AV SECM assembly.
2. Operate air compressor IAW Instruction Manual, Oil-Free Portable Air Compressor.
Remote Area Light
Operate Remote Area Light IAW Instruction Manual, 9450B Remote Area Lighting System Owner s Manual.
END OF TASK
00052
