TM 5-3610-256-14
Table 3-2. Organizational Preventive Maintenance Checks and Services (Continued)
W – Weekly
M – Monthly
Interval
W
M
Item to be Inspected
Procedure
CLEAN CYLINDER (CONTINUED)
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
Reconnect motor connector.
Reconnect right lamp connector.
Reinstall wing nut on right lamp assembly.
Reinstall right and left covers and turn captive
screws.
Depress feed switch and cover with tape.
Set Speed control to lowest number.
Plug in power cord.
Power ON and depress feed switch.
Dampen cloth with glass cleaner.
Care must be used when cleaning
cylinder as printing belts are moving.
Cloth and fingers must be kept clear
of belts or injury may result.
Move cloth along rotating cylinder.
Dry rotating cylinder with clean, dry cloth.
Power OFF.
Reinstall cylinder pick-off assembly on studs.
Unplug power cord.
Change 1
3-30
