TM 5-3610-256-14
4-12. REPLACE FWD/REV SWITCH.
TOOLS: Flat-Tipped Screwdriver
SUPPLIES: Fwd/Rev Switch
Unplug power cord before servicing machine. Death
or injury may result from failure to comply with this
warning.
a.
b.
c.
d.
e.
f.
g.
h.
Power OFF.
Unplug power cord.
Remove right cover by
Label wires to switch (1)
PulI connectors from switch.
Release tabs holding the switch (1) to switch bracket.
Replace switch by spreading tabs and pushing switch into opening until it locks.
Push connectors on male switch terminals.
i. Reinstall right cover and turn captive screw.
j. Plug in power cord.
k. Power ON.
l. Perform operational check.
4-13. REMOVE CONDENSATION.
TOOLS: Flat-Tipped Screwdriver
Safety Goggles
Vacuum Cleaner
SUPPLIES: None
4-12
