TM 5-3610-256-14
1.
2.
3.
4.
5.
6.
NOTE
Use the illustration below to determine
the routing of the tubing.
. BOTTLE
AMMONIA
DEVELOPER TANK
VACUUM CHAMBER
CONDENSATION BOTTLE
PUMP
ABSORBER CONTAINER
h. Place tapered nozzle on vacuum cleaner.
i. Tape nozzle to other end of tubing and turn vacuum on.
j. Visually inspect tubing at 5 minute intervals to detect condensation. Continue running
vacuum for 15 minutes after last condensation droplets are observed and then remove vacuum.
k. Install new ammonia bottle.
4-14
