TM 5-4310-381-13
SECTION VI. MAINTENANCE INSTRUCTIONS
3-14.
GENERAL. This section contains removal, disassembly, inspection, repair, assembly and installation instructions
for compressor components listed in Appendix B. Section III Maintenance Allocation Chart.
3-15.
INFLATOR VALVE ASSEMBLY REPLACEMENT.
INITIAL SETUP. This task covers disassembly, repair and assembly:
a.
Tools. General Automotive Tool Kit, T1 5180-00-177-7033.
b.
Equipment Condition. Inflator valve assembly removed from air hoses (usually stored in tool box).
DISASSEMBLY.
a.
Remove seal (1) from cylinder (2).
b.
Unscrew cylinder retaining screw (3).
c.
Remove cylinder (2) from body (4).
REPAIR.
a.
Inspect inflator seal (1) for cracks or damage. Replace as necessary.
b.
Inspect O-ring (5), valve disc (6), and washer (7). Replace as necessary.
c.
Inspect body (4) for dents or damage.
ASSEMBLY.
a.
Install cylinder (2) through body (4) and install seal (1).
b.
Assemble new parts (5, 6 and 7) and secure with retaining screw (3).
3-8
