TM 5-4310-381-13
REMOVAL.
CAUTION
To avoid equipment damage, compressor must be shut down before
performing maintenance procedures. Engine must be cooled down
before removal.
a. Place machine on flat level surface. Block wheels if surface is not level.
b. Remove gas line (1) from fuel filter (2). Drain gas into suitable container (maximum capacity: 2.1 gals., 8 L).
c. Remove guard and drive couplings. Refer to paragraph 3-18.
d. Remove four mounting bolts (3) securing engine brackets (4) to frame base.
NOTE
Do not remove engine (5) from brackets (4) unless engine stand is
available. Remove engine and mount together from frame.
e. Remove engine (5) from frame.
INSTALLATION.
a. Install engine (5) onto frame base.
b. Install four mounting bolts (3) securing engine brackets (4).
c. Install drive couplings and guard. Refer to paragraph 3-18.
d. Install gas line (1) to fuel filter (2).
e. Refill fuel tank.
3-18
