TM 5-4940-200-35
(2) Refer to TM 5-4940-200-12 and set the
Note
brake lock.
Inspect lines for leaking
connections. Tighten leaking connections.
Be sure the electric brake lock is
If the brakes fail to hold the truck in
installed in such a manner that the
position, the electric brake lock is
output side is toward the rear.
defective and must be replaced.
Section IV. DECLUTCHER, PROPELLER SHAFT, AND POWER TAKEOFF
UNIVERSAL JOINT AND SHAFT ASSEMBLY
declutcher into the power train; otherwise it remains in its
33. General
normal position.
a. The declutcher is located between the truck
c. The power takeoff universal joint and shaft
transfer case and the propeller shaft. It provides a
assembly is mounted to the emergency brakedrum by
means of disconnecting the power from the transfer case
means of a yoke; it provides driving power to the power
to the rear wheels in order that the truck transmission
takeoff.
may be placed in gear to provide power takeoff for
driving the generator-welder.
34. Declutcher and Coupling Flange
b. The propeller shaft of the truck has been
shortened to provide space for introduction of the
declutcher and coupling flange.
Figure 13. Declatchcr and coupling flange, removal and installation.
28
