TM 5-4940-200-35
(6) File minor burs and nicks smooth.
(7) Replace all damaged parts and hardware.
d. Reassembly. Refer to
figure 14 and reassemble
the declutcher.
e. Inspection. Inspect the coupling flange (Fig. 13)
for cracks or breaks. Replace a defective coupling
flange.
f. Installation. Refer to
figure 13 and install the
coupling flange and declutcher.
35.
Propeller Shaft
a. Removal.
propeller shaft flange from the declutcher.
propeller shaft.
b. Disassembly.
Refer
to
and
disassemble the propeller shaft.
c. Cleaning, Inspection, and Repair.
(1) Clean all metal parts with an approved
Figure 15. Propeller shaft, removal and installation.
cleaning solvent and dry thoroughly.
(8) Inspect the bearings for wear, rust, galls,
excessive wear, burs, scores, nicks, or
or rough spots.
other damage.
(9) Replace a defective bearing by replacing
(3) File off all burs and smooth nicks with a
the universal joint cross.
file.
(4) Inspect the hub yoke for burred, nicked, or
d. Reassembly. Refer to
figure 16 and reassemble
scored splines and for cracks, damaged
the propeller shaft.
threads, and other defects.
(5) File burs and nicks from the splines.
e. Installation.
Replace a damaged hub yoke.
(6) Inspect the shaft assembly for cracks or
(1) Refer to figure 15 and install the propeller
breaks. Replace a cracked or broken
shaft.
shaft assembly.
propeller shaft flange to the declutcher.
36.
Power Takeoff Universal Joint and Shaft
Assembly
a. Removal. Refer to
figure 17 and remove the
power takeoff universal joint and shaft assembly.
30