TM 5-4940-200-35
(2) Refer to figure 23 and disassemble the
d. Reassembly.
power takeoff upper linkage, model
CMU-5.
(1) Refer to figure 22 and reassemble the
power takeoff upper linkage, model
c. Cleaning, Inspection, and Repair.
SECM.
(2) Refer to figure 23 and reassemble the
(1) Clean the upper linkage in an approved
power takeoff upper linkage, model CMU-
cleaning solvent.
5.
(2) Inspect all parts for cracks, breaks and
other damage.
e. Installation. Refer to TM 5-4940-200-12 and
(3) Weld cracks and minor breaks.
install the model SECM or model CMU-5 power takeoff
(4) Replace all defective parts.
upper linkage.
1
Knob
5
Washer, flat, 1 3/16 in. id, 2 in.
2
Stud (spec)
od, 0.177 in. thk (2 rqr)
3
Operating lever
6
Sleeve bearing (2 rqr)
4
Lever shaft
7
Upper linkage bracket
8
Operating link
Figure 22. Power takeoff upper linkage, model SECM, disassembly and reassembly.
38
