TM 55-4920-213-15
Storage
Storage
Nomenclature
Total
drawer
drawer
Nomenclature
Total
No.
No.
13
13
13
b. Location of Mounted Equipment. I n
some instances, tools, equipment or instru-
13
ments are mounted on walls, floor, or benches
13
of the shop. These items are either too large
for cabinet storage, or their use makes cabinet
13
storage impractical. Refer to figures 21, 22,
13
23, and 24, for floor plan of shop set.
13
c. Grinding Machine, Utility. The grinding
machine is bench mounted as shown in figure
33, typical mounting method. Details of mount-
ing locations are shown in figure 21.
13
d. Vise, Machinist's. The vise is bench
mounted. Refer to figure 34 for typical
13
mounting method. Details of mounting loca-
tion are shown in figure 21.
e. Slip Roll Machine. The slip roll machine
11
4
is bench mounted as shown in figure 35, typi-
13
cal mounting method. Details of mounting
locations are shown in figure 21.
35
f. Stake Holder Plate. The stake holder
35
plate is bench mounted (fig. 21). Typical
mounting method is shown in figure 37.
35
Mounting location is shown in figure 36.
35
47
