TM 55-4920-213-15
Figure 34. Typical bench mounting, machinist's vise.
Figure 35. Typical bench mounting, slip roll machine.
g. Rule, 36 Inch. The rule is bracket
i. Buckets, 14 Quart. The buckets are
mounted on the shop front wall (fig. 24).
mounted underneath the storage cabinet at the
h. Straight Edge. The straight edge is
right rear of the shop (fig. 23). Tie down
mounted at the top of the front wall (fig. 24).
A pocket and tie-down strap is used to secure
j. Shearing Machine, Metal, Squaring. The
the straight edge (fig. 39). Straps and loops
shearing machine is floor mounted. Mounting
for mounting other equipment are shown in
plates, when attached, provide a secure
figures 38,40,41,42, and 43.
mounting for the machine when in operation
48