TM 55-4920-217-15
Mounting not secure .................. Reposition and secure
151. Excessive Noise
mounts.
Equipment assembled
Probable cause
Possible Remedy
improperly.............................. Re-assemble
equipment correctly.
Section V. ELECTRICAL SYSTEM
testing, or replacing switches and circuit breakers in
152. General
accordance with appendix II. Refer to paragraphs 142
through 151 for procedures.
Refer to paragraphs 101 through 105 for a detailed
description of the electrical system.
155. Lighting System
153. Electrical Wiring Installation
Refer to paragraphs 101 through 105 for a
description of the lighting system. Field and depot
Field and depot maintenance personnel are
maintenance personnel's responsibilities consist of
responsible for performing tests and correcting
testing, or replacing defective components of the
discrepancies in the electrical wiring system as
lighting system in accordance with appendix II and TM
authorized by appendix II. Refer to paragraphs 142
9-2330-23814.
electrical wiring system is listed in paragraphs 101
156. Controls and Instruments
Field and depot maintenance of controls and
154. Electrical Switches and Circuit Breakers
instruments consist of mounting in accordance with
Refer to paragraphs 101 through 105 for description
with the applicable technical manual.
of circuit breakers and switches. Field and depot
maintenance personnel's responsibilities consist of
Section VI. PNEUMATIC SYSTEM
with instructions in the technical manual for the
157. General
compressor.
Description of the pneumatic system is contained in
160. Lines and Hose
Field and depot maintenance of air lines and hose
158. Air Compressor
consists of mounting, testing, repair, and replacement.
Refer to paragraphs 142 through 151 for troubleshooting
Field and depot maintenance of the air compressor
procedures.
consists of mounting in accordance with technical
manual for the compressor. Repair or replacement
161. Controls and Instruments
mounting parts are listed in chapter 8.
Field and depot maintenance of controls and
159. Air Supply Tank
instruments consist of mounting in accordance with
Field and depot maintenance of the air supply tank
with the applicable technical manual.
consists of mounting in accordance with instructions in
101
