USING THE KEYHOLE SAW

USING THE CROSSCUT SAW

USING THE HACKSAW - Continued

TM-9-243 Use and Care of Selected Hand Tools and Measuring Tools Manual
Page Navigation
241

TM 9-243 USING THE KEYHOLE SAW 1 To make an inside-out cut, first drill a hole (1) large enough to admit the point of the saw. 2 Insert the saw blade (2) and start to cut slowly, with a minimum of pressure. 3 Be careful not to twist the blade too sharply, as the narrow blade will easily bend. USING THE HACKSAW 1 Insert the correct blade (1) in the hacksaw frame (2) and adjust wing nut (3) for proper tension. 46-6

Privacy Statement
Press Release
Contact