TM 9-4940-421-14
4-47. AUXILIARY GENERATOR BRUSHES (fig
a. Removal.
(1) Disconnect and tag electrical wires.
(2) Remove end caps and springs and remove
brushes.
b. Cleaning and Inspection.
(1) Remove dirt and dust from brushes and brush
holders with low pressure compressed air.
(2) Inspect the brushes for breaks, nicks or
damage to the commutator wearing surface. Replace
worn or damaged brushes.
c. Installation. Install in reverse order of removal.
AR 701561
Figure 4-20. Auxiliary generator brushes, removal
and installation.
4-22
