AR 701572
6-6. GOVERNOR.
the governor.
removal,
b. Cleaning and Inspection.
b. Cleaning and Inspection.
(1) Wash the parts in solvent and dry thoroughly
(1) Clean all metal parts in an approved cleaning
solvent and dry thoroughly (app D).
(2) Replace a defective governor.
(2) Inspect the bracket and fuel head for cracks or
c. Installation. Install in reverse order of removal.
breaks. Replace if necessary.
(3) Inspect all parts for wear or other damage.
Replace if necssary.
6-7. DISTRIBUTOR.
c. Installation. Install in reverse order of removal.
the distributor.
6-5. CARBURETOR.
the distributor.
the carburetor.
c. Cleaning and Inspection.
b. Cleaning and Inspection.
(1) Before cleaning distributor cap, check for car-
(1) Clean all metal parts in cleaning solvent and
bon tracks.
dry cach part thoroughly (app D).
(2) Clean parts thoroughly with a clean, lint-free
(2) Blow out all passages in the throttle body and
cloth.
fuel bowl with clean dry compressed air. Reverse the
(3) Inspect distributor cap for cracks, broken
flow of air in the passages to insure that all dirt has
towers, burned or corroded terminals and worn center
been removed. Make sure that all carbon deposits and
contacts. Replace unserviceable cap.
other foreign matter have been removed from the
(4) Inspect rotor for cracks, carbon tracks, breaks
throttle bore and idle port.
and a burned, corroded or broken metal terminal.
c. Installation. Install in reverse order of removal.
Replace a damaged rotor.
