TM 9-4940-421-14
6-10. MANIFOLD ASSEMBLY.
a. Removal (fig 6-5).
(1) Remove carburetor (para 4-15).
(2) Remove four nuts and lockwashers securing
the manifold to the cylinder block.
(3) Lift off the manifold assembly from the
cylinder block. Remove gaskets and inserts.
b. Cleaning and Inspection.
(1) Clean the manifold with a wire brush to
remove any rust or foreign material.
(2) Examine the manifold for cracks or breaks.
Replace a defective manifold.
(3) Check the manifold cylinder block gaskets and
inserts. Replace if damaged.
c. Installation. Install manifold assembly in reverse
order of removal. Torque nuts 35 lbs. ft.
AR 7101575
AR 701576
