TM 9-4940-421-14
Figure 6-14. Crankshaft, piston and connecting rod, exploded view.
thoroughly (app D).
d. Cleaning and Inspection.
(3) Measure the cylinder bores with an inside
(1) Using a wire brush, remove all carbon from the
ring grooves in the pistons and from the top of the
pistons, making sure that the oil holes in the lower
crosswise above the ring travel; repeat the measure-
ment at the top of the ring travel. The difference in
ring grooves are open.
these measurements will determine the amount of
(2) Wash all parts in cleaning solvent and dry
6-14