TM 9-4940-421-14
opening of the crankcase (fig 6-15).
flywheel end of the crankshaft (25) and carefully
remove the assembled crankshaft through the rear
AR 701586
c. Removal of the Camshaft.
(8) Remove the crankshaft gear (20) with a press
(1) Remove the tappets (5, fig 6-13) from the
plate by pressing the crankshaft through the gear with
cylinder block.
an arbor press. Remove the woodruff key (17) from the
(2) Carefully remove the camshaft from the
crankshaft.
flywheel end of the engine (fig 6-16).
(9) Remove both bearings (6) from the crankshaft.
6-16
