TM 9-4940-549-14&P
FIGURE 15-2:
1
1
5
12
6
1
8
1
1
1
1
2
15-2 TENT FRAME.
Removal.
a.
Cleaning, Inspection, and Repair.
b.
(1) Clean all parts with cleaning solvent and dry thoroughly.
(2) Inspect all parts for bends, cracks, and other defects.
(3) Weld cracks.
If a bent pipe in the tent frame cannot be
straightened, cut bent section out and weld in a piece of pipe
of the same length and diameter.
Installation.
c.
15-3