TM 9-4940-549-14&P
15-6.
MILLING AND GRINDING ATTACHMENT.
Removal. Remove two nuts and washers (fig. 15-5), and remove
a.
milling and grinding attachment from panel.
Place the milling and grinding attachment on the panel
b.
Installation.
(fig. 15-5), and secure with the two nuts and washers.
Milling and Grinding Attachment, Removal and Installation.
Figure 15-5.
15-7.
VALVE REFACER.
Removal.
Remove valve refacer as illustrated in figure 15-6.
a.
Install the valve refacer as illustrated in figure 15-6.
b.
Installation.
17-TON PRESS FRAME.
15-8.
Removal.
Remove the press frame as illustrated in figure 15-7.
a.
Install the press frame as illustrated in figure 15-7.
b.
Installation.
DRILLING MACHINE.
Remove the drilling machine as illustrated in figure 15-8.
a.
Removal.
b.
Installation.
Install the drilling machine as illustrated in figure
